         |        |
Testimonials, Reviews & Articles
 |
Handyman Member Testing Feedback on Microplane®’s Rotary Shaper |
“I would definitely recommend getting this tool. I used it on some maple table legs after leaving 1/16” waste with my scroll saw, just to see how it would work. When I finished I didn’t even need to sand. Watch out drum sander, the Microplane® Rotary Shaper is here to stay!”
-Willard (Port Orchard, Washington)
“After a few minutes of getting the right pressure, it worked well with no clogging and a good surface was achieved. It will remain a tool I use.”
-Don (Centerville, Massachusetts)
“An excellent replacement for a band sander for rough to medium shaping and smoothing”
-Jack (Bear, Delaware)
“The Microplane® is a very effective tool. It works better than the #40 grit sanding drum.”
-Kenny (Tuttle, Oklahoma)
“The Microplane® Rotary Shaper is a very beneficial product for woodworkers who have a small work place and can not have large shapers.”
-Robert (Maryville, Tennessee)
“The first thing that comes to mind after using the Microplane® Rotary Shaper is WOW! It is very fast, and removes wood quickly. The little fans in the top and bottom quickly exhaust the shaving out of the bottom. Overall I really liked it, never have I ever used any tool that shaves wood so quickly and smoothly. Neat tool.”
-Gerald (Jacksonville, Illinois)
“WOW! Very nice, easy to mount and use. Attached to the drill press in seconds and cleanly shaves hard and soft woods without clogging. Better than a sandpaper shaper because no dust is generated. I love it!”
-Carl (Fayetteville, North Carolina)
“Performance exceeds expectations!” Very handy to remove wood in shapes that would be difficult or impossible with other tools in this price range.”
-Vincent (Dewey, Arizona
“This Microplane® tool cut through plastic like butter. Unlike other sanding methods it did not start to melt the plastic. Also, there is very little dust in the air, which created small shavings that made for easy clean-up.”
-Douglas (West Point, Utah)
“A great product. This is the best shaper I have ever used. I decided to ‘abuse’ this tool and see how it would behave. I put it in a variable speed drill and used it to rasp the edges of some sheetrock. I needed an obtuse angle, and this tool did an amazing job. Its two-inch cutting surface and excellent dust control-even with sheetrock- completed the task in no time at all. I’ll be hanging on to this one and getting rid of all the other shapers in my toolbox.”
-Thomas (Brookings, South Dakota)
“This Microplane® Rotary Shaper is an excellent tool for shaping anything that you would use a belt sander or a drum sander. This tool pulls off stock in chips and not in dust. It also drops chips from the bottom of the tool and doesn’t throw them all over the place. It also leaves a nice look on your parts.”
-Chris (Houma, Louisiana)
“The Microplane® Rotary Shaper worked great. It was easy to use and cleanup. I tried this on a regular drill and it saved me so much time. I used to use a palm sander and sanding by hand to get the edges of woodwork even and clean-Not anymore! I’ll be using the Microplane® Rotary Shaper a lot. A must have for saving time.”
-Brian (Cleveland, Ohio)
Microplane® Tools
Hand Tools / Sandpaper / Snap-In / Drill Attachments / Hacksaw Blades / Surform® Replacements / Kitchen /
Home
/
New
/
Testimonials
/
About Us
/
Links Ordering Info
/
Technology
/
Feedback
/
Gift Sets Store
The Microplane®
Division of Grace Manufacturing
Inc.
614 SR 247, Russellville, Arkansas 72802
phone: (800) 555-2767 / fax: (479) 967-0404 wwinfo@microplane.com
Surform® is a registered trademark of Stanley
Tools.
Microplane® is a registered trademark
of Grace Manufacturing Inc.
All contents Copyright © 1997 Grace Manufacturing Inc.